Conventional NDT Services
Ultrasonics Testing
- Flaw detection on raw materials, plates, forgings, castings
- Weld test using longitudinal angle & shear wave probes
- Thickness Measurement
- Special probes to measure thickness on smaller OD tubes.
- Through paint thickness on steel measurement possible with Imported machines
- Thickness measurement on hot surfaces
- Bond Testing
- UT 'A' scan continuous recording facility
- UT A B & Sectoral Scan
- Corrosion Mapping
Coating Thickness Measurement
Radiographic Testing
- Gamma-ray using Iridium(Ir-192), Cobalt (Co-60), & Selenium( Se-75)
- Small Controlled Area Radiography (SCAR) / Close Proximity System (CPS)
- X-ray External type up to 250 kV.
- Advanced facilities including Automatic Film Processor & Auto Drier.
Radiographic Testing
We ensure that welding repairs are kept to a minimum by providing welders with quick and accurate process control feedback derived from our inspection data.
Oxide Scale Measurement
Liquid Penetrant
- Fluorescent Method
- Non Fluorescent Method
Magnetic Particle Testing
- Prod (from 1000 Amps Up to 6000 Amps)
- Electro Magnetic Yoke
- Head shots
Positive Material Identification (PMI) by XRF Method
Hardness Testing
- Portable Hardness Machines
Remote Visual Inspection (RVI)
Infrared Thermography
Wire Rope Testing
Ferrite Testing
